Home Assistant: the complete build
One house, one hub, zero subscriptions. This guide builds a full Home Assistant system in Docker on a NAS — the reference build uses a UGREEN NASync DXP2800 (Intel N100), but any always-on NAS or mini-PC works the same way.
Chapters
- Getting started — Docker install, the Matter server container, backups and first integrations.
- Radios & protocols — Zigbee, Bluetooth, Matter over Thread and Z-Wave, and the coordinators that run them.
- Cameras — a wired Reolink doorbell plus Wi-Fi outdoor cameras, local recording only.
- Voice & music — self-hosted Assist, voice satellites, speakers and Music Assistant.
- Switches & sensors — lighting control, presence, leak, air quality, smoke/CO and energy sensing.
- Network & remote access — AdGuard Home, Tailscale exit nodes, and what not to expose to the internet.
- Build list & costs — the whole build in three priced tiers.
What it costs
Tier 1 — about $632.93: the hub, coordinators and the core sensors that make the house feel smart. Tier 2 adds cameras, switches and voice. Full build — roughly $1,600 without a smart thermostat, $1,800 with: everything in this guide. Required subscriptions afterwards: $0/month. See the full priced build list.
What you need before you start
- An always-on NAS or mini-PC that can run Docker (the reference NAS has spare Ethernet but no PoE — every pick in this guide works around that)
- A router you control; mesh systems like eero work, with the caveats in the radios chapter
- About a weekend for Tier 1, then an hour or two per chapter after that