Cameras with local recording and no subscription

The test for a camera system is simple: if the company disappears tomorrow, do your cameras still record? Cloud-subscription cameras fail it. This setup — Reolink cameras recording to their own SD cards or a local hub/NAS — passes it, for $0/month.

The reference setup

SD card or NAS? The honest maths

Three cameras recording 24/7 write roughly 59 TB a year. That sounds alarming until you compare it with NAS hard drives rated for about 180 TB of writes a year — and motion-based recording cuts the real figure to roughly 9–15 TB a year. In-camera endurance SD cards are the quiet winners for most homes: a 256 GB card typically lasts 5–11 years per camera and keeps recording through Wi-Fi outages. Recording to an SD card plugged into a NAS, by contrast, is not a supported path on typical NAS systems and wears a card out in about two years while holding only a few days of footage.

Why not the other ecosystems?

Some 'local-only' brands have been caught uploading face thumbnails and streaming unencrypted video — privacy claims need evidence, not packaging. At the other end, UniFi Protect is excellent but costs roughly $760–$900+ for the same doorbell-plus-two-cameras setup, versus about $290–425 here. Reolink is the value point where local recording, an official Home Assistant integration and on-camera person detection all exist at once.

Setup order that works

  1. Set cameras up in the Reolink app first, with SD recording and person detection on.
  2. Add the Home Assistant integration and build automations (porch light on person-detected, snapshot to your phone).
  3. Add central storage (hub or NAS) later if you want it — nothing you bought is wasted.

Next: voice & music · Build list & costs